Rukus Wireless ZoneFlex 7731 Guía de usuario descargar pdf (Pagina 107)

Managing the Access Point

Enabling Other Management Access Options

Tabl e 30 lists the TR-069 status information that the AP provides.

Pointing the AP to FlexMaster

Your ZoneFlex device is required to “call home” to register with your FlexMaster;

FlexMaster does not initiate initial contact. To register successfully with FlexMaster,

your ZoneFlex device must know the FlexMaster server’s URL, thus entered on the

device. You will need TCP ports 80 and 443 between APs and FlexMaster when

traversing Layer 3/firewall boundaries.

To point the AP to FlexMaster

1. Go to Administration > Management.

2. Under TR-069/SNMP Management Choice, click Auto.

3. In FlexMaster Server URL, type the URL of the FlexMaster server.

4. Toggle the Contact FlexMaster every drop-down list to select how frequently

the device will check the FlexMaster server for any pending configuration changes

available for that ZoneFlex unit. On the FlexMaster side, this field is referred to as

the Periodic Inform Interval.

5. Click Update Settings to save your changes.

After the AP registers with FlexMaster, this Administration > Management page

will show the communication status between the AP and FlexMaster.

Table 30. TR-069 status information

Status Information Description

Currently using Shows the FlexMaster server IP address or URL

with which the AP is currently registered

Last attempted contact Shows the date and time of the AP’s last attempt

to contact FlexMaster. Date and time are

specified in GMT (or UTC), which are accurate if a

Network Time Protocol (NTP) server is configured.

Last successful contact Shows the date and time of the AP’s last successful

contact with FlexMaster.

Last contact result Shows the result of the last attempt to contact

FlexMaster (success or failure, and failure error

code if applicable).

Current time Shows the current date and time as known to the

AP. This timestamp is accurate if an NTP server is

configured on the AP. If there is no NTP server

configured, this timestamp is useful as a reference

for comparison of the timestamps for Last

attempted contact and Last successful contact.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 119 120

Sin comentarios

Rukus Wireless ZoneFlex 7731 Guía de usuario Pagina 107